| Heat Exchangers |
Manufacturer |
Model |
Serial Number |
Notes |
|
Cherry Burrell |
655SB-3 |
2277 |
Stainless Steel Frame, 3.5" Connections, 84 Plates |
|
SECESPOL |
- |
03G043010 |
Year 2003 |
|
Cherry Burrell |
ThermaFlex - 655CBH |
95077XA |
Year 1995, Flow Rate 150 GPM, 316L Stainless Steel, 3" S Conections |
|
Mueller |
AT50W F-25 |
311742 |
This is a Dual Unit That Consists of Two Heat Exchangers Seperated by a Blank Plate, Stainless Steel Plates, Gravity Ammonia System, 82 Plates, Hot Side Water Flow Rate is 134 GPM, 80º F To 50º F, 43ºF Suction Temp, Hot Water SIde Flow Rate is 100 GPM from 55ºF to 45ºF, The Cold Side is flooded ammonia with a 43ºF Suction Temp., Hot Side Water Flow Rate is 134 GPM from 80ºF to 50ºF, 43ºF Suction Temp. |
|
Cherry Burrell |
|
|
Stainless Steel Construction,
3" Flange, 62 Plates |
|
Alfa Laval |
Clip 10 |
30105-57564 |
Year 2002, 273 Plates, 4" Flange, Stainless Steel Construction |
|
Baltimore Air Coil |
HK10-12-3-3C |
96100577 |
150PSI @ 200ºF |
|
Statco |
Alfa Laval Clip-6RM Heat Exchanger |
185 Plates, 145PSI, 26 Gallons/Minute Flow Rate - Single Strength Juice |
Setup for Hot Fill Application, Includes Feldmeier 1000 Gallon Buffer Tank |
|
APV |
SR-35 |
16032 & 15305 |
- |
|
Brinks |
T8CH |
3081 |
Stainless Steel, Max Flow: 20 G.P.M. |
|
Feldmeier |
3" Diameter Pipes |
Installed 1995 |
SS Construction, Regen. Zone, Heating Zone, Cooling Zone, Last ran 58 Brix @ 30 G.P.M. |
|
Waukesha / Tetra Pak |
HE T45CH-AL1 |
4936 |
Stainless Steel Construction, March 2006 Removal |
|
APV |
Hot Fill Thermal Processor |
Good Condition |
Stainless Steel Skid, 130 Gallons/Minute |
Heat Exchanger |
Alfa Laval - Tetra Pak |
Clip 10-RH |
30102 & 83926 |
1995, All Stainless Steel |
|
Cherry Burrell |
- |
98233BA |
316 SS, 60 GPM, Removable tubes for complete flexibility, Sanitary 3A construction, Low operating cost with direct heat regeneration , 1998, concentrates and bases for syrups |
| - |
- |
- |
- |
Top of Page |
.jpg)
